Видео

Can i put the ez prime under this and end up with same results?

Where's the maintaining and dressing video?

Bro is def not hourly

This is something that I've never done wood filler does not hold well I will spot fill nail holes and such but in my opinion would filler is not a professional move

💩

This is amateur hour. Every Bona tech will tell you to keep a wet edge. Several times he is dragging a dry edge around. If you're watching this video as a beginner, skip it and look up the Bona tech instructional videos.

Would you use these to strip heavy painted floors?

Hummel is the German word for bumble bee. Bees hum/buzz when flying Hummel sanders gave that characteristic hum when running.

Can you do one on the super Hummel please

On the new rider cart. What are the orange wires under the seat for? Do the disconnect the power when you jump off the rider?

lol Improper use.. supposed to always sweep first.

Why would anyone give a fuck about watching this? What a waste of

How much just for the kart only ?

Do these work with jatoba?

R540 can be used on osb? Can I do hardwood solid or engendered hardwood flooring over it?

Loooove my Gecko.

These guys are terrible presenters for the company

what are your thoughts on putting down a liquid concrete sealer to completely seal the concrete before putting down any glue?

With the hydra can u use it to remove swirls instead of going around the room with an orbital? Or do u still need to go around and orbital hand sand around the room?

Hi This is James I use super7r edger and the motor suddenly stopped. But the strange thing is that when I turn on the power, the switch lights up. I checked the brush and found that more than two-thirds of all four are left. That's the case, but the motor doesn't work, so can you tell what's wrong with your experience. Regard James

This guy looks like David Koechner !! (Dennis from final destination 5)

What a beautiful machine

Great video ,

Super helpful video, for anybody else confused, he did give out the wrong measurements for player positions when going over the key. First block does start at 7ft but goes to 8ft (not 7ft 8in). This confused me for a bit.

Worse investment I ever made… good sander to sand risers but poorly made. Mine stop working after 3 months of used when to my local repair shop and they had 4 compass edger sander with same problem.

That looks like three shades of shit.

Neutralize it?

This is actually a better explanation and step by step for sheen application than the company has. I was confused before and not sure. So the answer is 3 parts sheen to 1 part accelerate with no 2c involved at that stage of sheen addition. I was not sheen sure product was used that way or if it was stand alone.

36 comes right out with 80 if you have 5hp+ just sayin lol

Very official and by the book, then you put your pinky an inch away from the wheel LOL.... is that really how you hold that?

When the engine gets real hot what could be the problem if you could help

Please get a better mic🙃

Can you use this on LVT ?

Looks like Bona product...but what color stain are you using here?

Uncertain about how he applied this product...didn't work with boards and looks like he got a very uneven and blotchy result. One can see where he started and stopped applying product. Rag seemed wetter or dryer resulting in uneven look. Interesting look, but not sure about how he applied it.

😂Funny as hell😂😂😂

$120 per tread you're out of your damned minds 😂.

I swear the times are getting slower

Installing the riser first will help push the tread back

How to roll this?

Those first came out in 1990 and I used it for twenty years, saved my back for retirement. Once you get comfortable with it you get a lighter touch and go faster than on one knee. I always connected to a vac, makes it almost dustless and you don't have to stop to empty bag. Plus there is no room for a bag, especially a full bag. Might be a big expense upfront, but it doesn't wear out and I sold it when I retired. Also never wore a black shirt/pants while sanding. Just my preference.

Excellent machine

Really the Hummel is bullet proof no problems from new

Water pop, custom 1 coat stain. 2 or 3 topcoats and be done

Do you recommend Applying stain with trowel on uneven floors?

Can you sand wood floors lets say instead of a belt sander

Whats your name the machine?

How does it hold out long-term compared with oil products? What is difference between Bona Traffic and Bona Traffic HD?

I wish you had done only half the floor to compare the sheen with and without.

PLus for the Bona Power Drive, you don't use it like a buffer for aggressive sanding... the handle is meant to almost be completely upright but just a slight angle. Add the weights and use it correctly and it would do even better than here.